Connecticut Screen Works®

Contact

How to reach Connecticut Screen Works

Our staff is available for guidance, technical assistance, project review and general questions, from initial planning and design through to plan review and project budgeting.

01Request for quote

Build a complete RFQ in one pass.

Every order is quoted individually, and an incomplete request cannot be priced. This collects everything we need and shows you the document as it assembles, so nothing has to be chased.

01 / What do you need?
02 / Who you are

We can't issue blank quotations, and we don't cold-call you, so don't worry.

03 / Specification

Product line

Finish *

Clear anodized is subject to limited availability. Confirm the finish and its lead time when you request a quote.

04 / Panel schedule

Sizes in inch and fraction only, width × height, for example 67-3/4" x 84". Any panel that is not a rectangle needs a drawing; note it below and we'll ask for it.

01
05 / Anything else

Goes straight to our office. One business day response.

02Where we are

Wallingford, Connecticut.

Connecticut Enclosures and Screens, LLC
P.O. Box 822
Wallingford, CT 06492
USA

Manufacturing is in Wallingford, in New Haven County. We are a manufacturer rather than a walk-in showroom, so the address above is our mailing address, please call before visiting, and we will give you directions to the shop.

Call for directionsFacebook
Wallingford, CT 06492Open larger map

03Before you write

The five things people ask first.

Budget a minimum of $100.00 to $150.00 per running foot. Your actual cost may be far higher, or lower, based on final layout, sizes and options ordered. Because of the variation in options and designs, every order is quoted individually; there is no price list.

No. All panels and walls are custom manufactured for your order. Nothing is held in stock and there are no standard sizes in inventory, which is why a complete specification is required before anything can be quoted.

You must first decide how you intend to install the panels, because each installation method has different measuring and sizing instructions. Review the installation methods, choose one, then measure. Sizes are submitted in inch and fraction format only, as width by height.

White and bronze commercial powder coat are stocked, Tiger Drylac Series 49/11340 and Series 38/60060 respectively. Mill, meaning unfinished aluminium, is available for customers applying their own finish. Full RAL spectrum powder coating, colour-matched Kynar paint in two or three coats, and Class I and II anodizing are all available on a custom per-order basis.

Screen Wall System® panels and walls carry a 30 year limited warranty; Simplicity® inserts carry a 1 year limited warranty. In both cases we repair or replace, at our discretion, any part found to have a manufacturing defect during that period under normal application and service. Neither warranty covers damage, labour, misapplication, incorrect installation, screen or hardware. Read the full warranty documents for details.